Relay Setting; Alarm Output Setting - Optex SC-U1 Operation Manual

Relay setting

uAlarm output setting
Set the alarm to be output when the measurement value exceeds a certain value.
The measurement item set on "Display Item" P.22 can be selected as the output item of
alarm output.
When the item on "Display Item" P.22 is changed, the output item of the relay
Caution
setting channel for which the display item has been set turns OFF.
Set again if necessary.
On the channel selection display, switch
1
between pages using
channel to set using
The setting item selection menu is displayed and the
current setting of the selected channel is displayed.
2
Select [Output Item] using
press .
A list of output items is displayed.
The measurement item set on "Display Item"
P.22 can be selected as the output item.
Available display items depend on a connected
sensor.
3
Switch between pages using
select a channel and item of a sensor to
set alarm output using
and press
If output is unnecessary, select [OFF]
and press
Available display items depend on a connected sensor.
The selected item is set as the alarm output target
and displayed in [Output Item].
40
, select a
, and press
.
.
.
, and
,
,
Output item
Sensor channel
Output Sensor
item model
Sensor channel