Auto Lock - Optex SC-U1 Operation Manual

uAuto lock
Set the time to automatically lock the button operations.
After unlocking, the lock will be turned ON after the time set here has elapsed and the display
returns to the measurement value display.

Auto Lock

1 to 120 minutes
In the Main Unit Setting menu, select
1
[Passcode Lock] using
and press
2
Select [Auto Lock] using
and press
When passcode lock is OFF, the
display is displayed as shown on the
right, and passcode cannot be set.
Caution
The passcode lock must be set as ON
("Passcode lock setting" P.52) before
performing operations.
3
Input a value using
When a value outside the set range is entered, a short
beep sounds.
Press
to reset to the factory default setting.
By pressing
before changing it.
The display returns to the passcode lock setting menu.
54
Setting range
.
.
, and press
simultaneously while entering a value
or , the value returns to the one
1 minute
,
,
.
Factory default setting