Optex SC-U1 Operation Manual page 71

3
Select [Timer Setting] using
and press
The cursor moves to the setting of days.
4
Select a digit by
, and press
• The factory default setting is [OFF]. Press
display the maintenance timer input display.
• When the value is 7, press
The set days is entered and the display returns to
the maintenance menu.
When a value outside the set range is entered, a short
beep sounds.
Press
to reset to the factory default setting.
By pressing
before changing it.
Refer to "Maintenance output setting" P.46 to set [Maint.] of the sensor
5
for which maintenance timer is set in the output item of relay output.
.
and value by
.
to select [OFF].
simultaneously while entering a value
or , the value returns to the one
,
to
71