Send Channel Setting - Optex SC-U1 Operation Manual

Send channel setting

Set the Send Item and Send Interval to the Send Channel.
Up to 12 channels can be configured.
The Send Item is OFF at the factory default setting.
When the item on "Display Item" P.22 is changed, the value of the send channel
setting for which the display item has been set turns OFF.
Caution
Set again if necessary.
The maximum number of channels that can be sent depends on the gateway.
In the GW setting menu, select
1
[Send Channel Setting] using
and press
The send channel setting display is displayed.
Up to 12 channels are available for transmission
to the gateway.
2
Select a channel using
press .
In the selected channel, the set Send Item and
Send Interval are displayed.
3
Select [Send Item Select] using
and press
Select a send item to the channel using
4
, and press
The measurement item set on "Display Item"
P.22 can be selected as the send item.
28
.
, and
.
.
,
Sensor channel
,