Off Delay (Cancel Timer) - Optex SC-U1 Operation Manual

●Off Delay (cancel timer)
Set a time period to cancel alarm output after a measurement value falls under (or exceeds)
the alarm hysteresis.
Off Delay OFF
1 to 120 minutes
In the setting item selection menu, select
1
[Off Delay] using
2
Select a digit by
, and press
• The initial setting is [OFF]. Pressing
the Off delay input display.
• When the value is 1, press
When a value outside the set range is entered, a short
beep sounds.
Press
to reset to the factory default setting.
By pressing
before changing it.
The display returns to the setting item selection menu.
Setting range
, and press
and value by
.
to select [OFF].
simultaneously while entering a value
or , the value returns to the one
Factory default setting
OFF
.
displays
45