On Delay (Alarm Timer) - Optex SC-U1 Operation Manual

●On Delay (alarm timer)
Set a time period to output alarm after a measurement value exceeds the active level.
On Delay OFF
1 to 120 minutes
In the setting item selection menu,
1
select [On Delay] using
and press
2
Select a digit by
, and press
• The initial setting is [OFF]. Pressing
the On delay input display.
• When the value is 1, press
When a value outside the set range is entered, a short
beep sounds.
Press
to reset to the factory default setting.
By pressing
before changing it.
The display returns to the setting item selection
menu.
44
Setting range
.
and value by
.
to select [OFF].
simultaneously while entering a value
or , the value returns to the one
OFF
,
displays
Factory default setting