Example: Offset Adjustment Using Turbidity Checker - Optex SC-U1 Operation Manual

uExample: Offset adjustment using turbidity checker
1
Press .
The measurement item selection display is displayed.
2
Use
offset adjustment and press
The pages can be switched
The adjustment menu is displayed.
Select [Offset Adjustment] using
3
, and press
The correction items to display depends on a
sensor.
Enter the offset value.
4
Select a digit by
, and press
When a value outside the set range is entered, a short
beep sounds.
Press
to reset to the factory default setting.
By pressing
before changing it.
During adjustment a progress bar is displayed.
When completed, the display returns to the
measurement value display.
to select the item for
.
and value by
.
simultaneously while entering a value
or , the value returns to the one
.
.
Measurement Sensor
item model
Sensor channel
65