Cleaning - Optex SC-U1 Operation Manual

9

Cleaning

Cleaning
Set the sensor cleaning settings.
Pressing
Caution
1
Press .
The sensor selection display is displayed.
2
Select a sensor to set using
and press
The cleaning menu is displayed.
By selecting [ALL], all of the installed sensors can be
selected.
Shown below are available items.
Caution
Available items depend on a sensor.
Item
Manual
Cleaning
Shown below is the setting to automatically activate the wiper of the sensor.
Cleaning
Interval
Cleaning
One round
trip of
wiper blade
• The setting time for the cleaning interval is the time interval between the end of
cleaning and the next cleaning.
• The cleaning action is fixed at one wiper blade round trip per cycle.
automatically retains the measurement value.
.
The wiper and cleaning device can be manually activated.
The measurement value of the target sensor is retained
(held) during cleaning.
Set a time interval to activate the wiper.
Cleaning not performed
Cleaning interval
,
Description
Cleaning Cleaning not performed
One round
trip of
Cleaning interval
wiper blade
Output item Sensor model
Sensor channel
Refer to
P.74
P.75
73