uDisplay Item
The measurement items can be set to display in the main, second, and third display fields
("Display" P.14).
Available display items differ for a sensor. Refer to each sensor's instruction manual.
When the display item is changed, the values set on "Send channel setting" P.28,
"4-20 mA setting (4-20 mA output item setting)" P.32, and "Relay setting" P.40
for which the display items have been set turn OFF.
Caution
The values of "Offset Adjustment", "Span Adjustment", and "2-Point Adjustment"
described in "7 Adjustment" P.63 returns to the factory default values.
Set again if necessary.
On the sensor selection display, select a
1
sensor to set using
The sensor setting menu is displayed.
2
Select [Display Item] using
and press
Current display item setting is displayed.
3
Select [Main Dis.] using
and press
Available setting items for the main display
are displayed.
The main display item is displayed largest
when displaying measurement value.
22
, and press
.
.
.
,
,
Current
setting item
Main display
Measurement
Sensor
item
model
Sensor channel