Relay Setting - Optex SC-U1 Operation Manual

5.4 Relay Setting

Configure the relay output settings.
The factory default setting is OFF for relay output.
Caution
Pressing
1
Press .
The setting menu is displayed.
2
Select [Relay Setting] using
and press
The channel selection display is displayed.
For each relay output channel, the current sensor
channel, output item, trigger setting, and active level
are displayed.
To switch between pages, press
On the last page, relay test mode can be selected.
3
Select a channel to set using
and press
The relay setting menu is displayed.
38
automatically retains the measurement value.
.
.
,
.
Sensor channel
,
Output item