Decision Data 3000 Series User Manual page 99

Error Identification
0070 to 0078, Text Entry Assist Error Codes
If you are using the Display Write program and an error code in the range 0070 through
007F is displayed, refer to the following Text Entry Assist Error Code Chart for a detailed
description of the problem and a suggested recovery action.
Error Description and Suggested Recovery
Code
0070 Word Wrap/Carrier Return Error. To recover - press the Error Reset key. For more
information, press the Help key.
0071 Command Conflict. To recover - press the Error Reset key. Try the operation again
when the operation in progress is complete.
0072 Key Not Valid For Cursor Position. To recover - press the Error Reset key. Move the
cursor to the correct position and try again.
0073 Invalid Attempt To Delete. To recover - press the Error Reset key. Press the general
prompt command key to delete or replace instruction and format change characters. For
more information, press the Help key.
0074 Invalid Entry During General Prompt. To recover - press the Error Reset key
0075 Character Not Found. To recover - press the Error Reset key. Try the operation again
when the operation in progress is complete.
0076 Continuous Insert Mode Failed
To recover - press the Error Reset key. Wait until the host system processes the text on
the screen and try again.
0077 Function Key Selection Not Valid. To recover - press the Error Reset key.
0078 Required Scale Line Not Defined to Control Unit There is an error in the application
program. No scale line is defined for this line.
A-12
Text Entry Assist Error Code Chart