Example Of Token-Ring As/400 Configuration - Decision Data 3000 Series User Manual

AS/400 System Configuration

9.3.3Example of Token-Ring AS/400 Configuration

a. Network Attributes Example
The AS/400 network attributes are created automatically by the AS/400 system. You may
view them and with proper authorization, you may also modify them.
Type the command: DSPNETA (to display Network attributes)
Type the command: CHGNETA (to modify Network attributes - authorized users only)
Parameter
Current system name:
Local network ID:
Local control point name (see note):
Default local location (see note):
Default mode:
APPN node type:
Maximum number of intermediate sessions:
Route addition resistance:
It is recommended to define both the Local Control Point Name and the Default Local
Location Name, with the same string.
b. Token-Ring Line Description
Type the command: CRTLINTRN
Parameter
LIND (Line Description)
RSRCNAME (Resource names)
MAXCTL (Maximum controllers)
LINESPEED
ADPTADR (Adapter address)
MAXFRAME (Maximum frame size) 1994
AUTO CRT CTL
Because AUTO CRT CTL is set to [YES], the APPC Controller will be created automatically
by the system.
12
*YES
Value
INT (can be anything)
APPN
XXXXXXXX
XXXXXXXX
QRMTWSC
*ENDNODE
200
128
Value
NLINE
LIN011
40
4M
400000000000