Token Ring Line Description - Decision Data 3000 Series User Manual

Host Connections
Line Speed

4.1.3.3Token Ring Line Description

The Controller can be configured as either Token-Ring Attachment or Gateway -- not as
both. If you are configuring the Controller in Token-Ring Attachment, you cannot configure it
as Gateway.
The following screen is accessed when Line-2 is enabled as Token-Ring, in the Line Type
Selection menu. Define the parameters, referring to the parameter descriptions below, and
press ENTER.
Data Transfer Rate
Normal or Early Release
3494 Connection
Number
6
This is relevant for DCE only, specifying the appropriate
baud rate.
The Data Transfer Rate can be either 4 or 16 Mbps.
Default is 16 Mbps.
This depends on the ring configuration. Default is Normal
This is the 12-digit MAC address assigned to the
controller's Token-Ring adapter.
Enter the last 8 hexadecimal characters of the Token Ring
address the first four positions are 4000. Valid characters
are 0 - 9, and A - F (upper case).