Decision Data 3000 Series User Manual page 112

Table of Contents

Advertisement

520000 to 520003, Copy-To-Printer Codes
Refer to the following Copy-to-Printer Error Code Chart if the error code displayed is from
the series 52000x.
Error
Description and Suggested Recovery
520000
The 3494 did not find a printer available for local copy-to-printer operation. To
recover, Make sure your printer is powered on, is on-line, and has been
configured in the 3494 setup menu. Retry the operation.
520001
The device at the address selected for the copy-to-printer operation is not a
printer. Your configuration information may be incorrect. Return to the 3494
physical configuration menus and verify port and address information. Retry
the operation.
520002
The designated printer is busy, powered off, or in an error condition, or no
device is powered at this site. To recover, If the designated printer is busy,
wait for it to complete the current task and try again. Otherwise correct the
error condition and try again.
520003
The 3494 unit lost communication with the local printer during the print
operation. To recover, CReset originated at host system.heck cables,
connections and retry the operation.80-FF.
LAN AS/400 Attachment Errors
540404
No AS/400 response to the 3494 TEST command.
Communication problems. Controller will continue sending the
TEST commands until the AS/400 responds or the operator
initiates a disconnect.
540405
No AS/400 response to the 3494 XID3 command. Communication
problems. Controller will continue sending the XID3 commands
until the AS/400 responds or the operator initiates a disconnect.
540407
LAN frames transmission error. LAN data link is disconnected.
The controller continues to send the TEST commands to the LAN
to reestablish communications.
540408
Failed command to Ethernet adapter.
Copy-to-Printer Error Code Chart
Error Identification
A-25

Advertisement

Table of Contents
loading

Related Products for Decision Data 3000 Series

This manual is also suitable for:

Stk3494/3494

Table of Contents