Example Of Ethernet As/400 Configuration - Decision Data 3000 Series User Manual

AS/400 System Configuration
FORMFEED

9.3.4Example of Ethernet AS/400 Configuration

a. Network Attributes
The AS/400 network attributes are configured automatically by the AS/400 system. They
may be viewed and modified (by an authorized user).
Type the command: DSPNETA (to display Network attributes)
Parameter
Current system name:
Local network ID:
Local control point name (see note):
Default local location (see note):
It is recommended to define both the Local Control Point Name and the Default Local
Location Name with the same string.
b. Ethernet Line Description
Type the command: CRTLINETH
Parameter
LIND (Line Description)
RSRCNAME (Resource names)
ADPTADR (Local Adapter address)
ETHSTD (Ethernet standard)
LINKSPEED (Link speed)
Type CRTLINETH to create AS/400 system line description, WRKCFGSTS *LIN to display
AS/400 system line description, WRKHDWPRD to determine location of AS/400 system line
or hardware.
14
Value
SYSNAME
NETID
XXXXXXXX
XXXXXXXX
Value
ENLIN03
LIN03
400000000000
*ALL
10M
CONT