Table of Contents
Advertisement
Maximum In value times 2. Valid values are 2-8 frames. Default is 2.
Maximum In
This value is the maximum number of frames received by the controller
before it sends an acknowledgment. Valid values are 1-4 frames. Default
is 1
6.2Ethernet Gateway
For Ethernet Gateway configuration access the 3494 - Setup menu and enter option (6)
Gateway Configuration. The Gateway menu appears. Define the parameters according to
the given parameter explanations.
PU number
Address format
Specifies the Physical Unit which the PC is connected to. Since PC
support devices are not assigned sessions and are not displayed in
the PU/LSID map, this parameter is added to specify the PU which
the PC is connected to. Enabled PU's are displayed near the
parameters.
Valid values are 1 to 8. Default is 1. Select an active PU.
The address could be entered in Ethernet format ( 0 ) or Token-Ring
format ( 1 ).
Gateway Configuration
3
Advertisement
Table of Contents
