Decision Data 3000 Series User Manual page 89

Error Identification
1. Messages Common to FIRMWARE, BOOTER, LOADER,
SYSTEM
The following Error messages, have the same error ID that prevents saving the error
message onto the disk. This ID is not displayed on the front panel; instead, a short message
is displayed to identify the whole message.
In addition, these messages, can be displayed during one or more of the separate
programs that run on the controller. In order to know which program displayed the error
message, the program name is displayed right after the short message which identifies the
whole message.
The programs names are:
"FW" - Identifies the firmware
"LOADER" - Identifies the system loader
"SYS" - Identifies the main system or the utilities
"BOOTER" - Identifies communication problems
DSK INIT : I/O error accured while initiating system disk
Error message:"DSK INIT:X1.Error in init drive X2.Codes:X3,X4,X5,X6,X7."
Parameters : X1- Current program: "FW" or "LOADER" or "SYS".
X2 - Drive name of system disk: 'A' for diskette,
X3 -X7 - Codes: 5 internal disk error codes.
DRIVE : Error accured while trying to work with drive.
Error message:"DRIVE :X1.Unable to select drive X2.Codes:X3,X4,X5,X6,X7."
Parameters : X1 - Current program: "FW" or "LOADER" or "SYS".
X2 - Drive name of system disk: 'A' for diskette,
X3 -X7 - Codes: 5 internal disk error codes.
FL OPEN : Error accured while trying to open file or file was not found on disk.
Error message:"FL OPEN :X1.Error in openning file X2 or file not found in drive X3.Codes:X4,X5,X6,X7,X8."
Parameters : X1- Current program: "FW" or "LOADER" or "SYS".
X2 - File name: One of the system files.
X3 - Drive name of system disk: 'A' for diskette,
X4 - X8 - Codes: 5 internal disk error codes.
FL READ : Error accured while trying to read file from disk.
Error message:"FL READ :X1.Error in reading file X2.Read X3 from X4 sectors
A-2
'C' for harddisk.
'C' for harddisk.
'C' for harddisk.