Decision Data 3000 Series User Manual page 93

Error Identification
4. Error Codes
Error Codes are four or six digit hexadecimal codes that may appear on the error line in your
terminal workstation display during operation.
Error code ranges
Refer to the Error Code Range Chart below, and then go the appropriate chart.
Error Code Range
0000 to 003F
0040 to 005F
0060 to 0069
0070 to 007F
0090 to 009F
100000 to 10FFFF
110000 to 1FFFFF
400000 to 400900
400A00 to 411300
420000 to 441200
540404 to 540408
A-6
Description of Error Code and Suggested Response
An operator error occurred during an entry operation Locate the exact
code and follow the instructions. See Operator Entry Errors Codes
An error occurred on the communication network during controller/host
communication. Check the modems, cables, line and connections to the
host system.
An operation error occurred when trying Ideographic Support. See
Ideographic Support Error Codes.
An operator error occurred. See Text Entry Assist Error Codes while using
the text processing function.
A display station operator Error Codes. See Host Support System caused
an error that involves the host system.
A display station operator attempted to enter an incorrect or invalid, X.25
command or parameters from the keyboard. See X.25 Error Codes
An error was detected by the DTE or DCE X.25 Network. See sections
Call Systems and try to re-establish the communications.
Linking errors.
XID Errors
LU6.2 Errors
LAN AS/400 attachment errors