Network Information Screen - Decision Data 3000 Series User Manual

Network Information

5.2Network Information Screen

This is the first screen accessed when option (5) Network Information is selected from the
Setup menu. Define the parameters according to the provided explanations. The screen
below illustrates an SDLC screen. This screen is given as an example since it includes the
most common parameters. Other parameters unique to specific line types or attachments
are listed following the SDLC parameters.
Refer to your network subscription and match the parameters according to the following
table:
AS/400 Parameter
RWS Attributes - Remote location name
APPC Attributes -- Remote CP name
One for the mode names defined in the AS/400
Default Network Name
2
Controller Parameter
3494 LU name (Local Unit)
3494 CP name (Control Point)
Default Mode name
The name used when either the AS/400 Network name or the
3494 Network name is not provided. It should match the
'Local Network ID' as defined in the AS/400 network
attributes. This is a required parameter.
Valid characters are @,#,$,&, 0-9, A-Z (Upper case) up to 8
characters.