Decision Data 3000 Series User Manual page 79

C. APPC Controller Description
Type the command: CRTCTLRWS
Parameter
CTLD (Controller description)
LINKTYPE (Link type)
SWLINLST (Switched line list)
RMTNETID (Remote network identifier)
RMTCPNAME (Remote control point)
ADPTARD (LAN remote adapter address)
EXCHID (Exchange identifier)
APPN (APPN capable)
NODETYPE (APPN node type)
DSAP (LAN DSAP)
SSAP (LAN SSAP)
The format for the EXCHID parameter is 0730000, where X'073' is the block number
assigned to the 3494 and 00000 is used for Ethernet,
d. Remote Workstation Controller description.
Use the CRTCTLRWS command to create remote workstation controller description.
WRKCFGSTS *CTL command to display remote workstation controller description.
Parameter
CTLD (Controller description)
TYPE (Controller type)
MODEL (Controller model)
LINKTYPE (Link type)
RMTLOCNAME (Remote location)
LCLLOCNAME (Local location)
RMTNETID (Remote network identifier)
Select 2 if your 3494 contains a 3494 LAN adapter
e. Mode description
Use the DSPMODD command to displays the mode name description.
Parameter
MODD (Mode description)
Value
QRMTWSC
AS/400 System Configuration
Value
EN3494
*LAN
ENLIN03
*NETATR
EN3494CP
02003494E000
07300000
*YES
*LENNODE
04
04
Value
EN3494RWS
3494
*1
*NONE
EN3494CP
*NETATR
*NETATR
15