Host Connections
4.1.2Defining Line Types
from the Setup menu. The Line Connection screen appears:
The communication lines displayed on the screen reflect the hardware configuration as
detailed in the table below. Dto access the line description screens where the line
parameters are defined.
Line #
1
2
NOTE: If the communication line to the host is either switched or leased, select SDLC, if
communicating over a packet-switched public data network select X.25.
If you select Token Ring line, the option for Token Ring Gateway will not be available. This
restriction does not apply when selecting Ethernet line.
2
Line type
Sync
Token Ring or Ethernet
Protocols
SDLC or X.25