Table of Contents
Advertisement
AS/400 System Configuration
Attributes configured manually:
1.
Line type.
2.
APPC Controller
3.
RWS Controller.
4.
Device description for each NWS attached to the RWS controller.
To view the modes defined in the AS/400 System:
1. Type "WRKMODD", to display the modes.
2. Choose Option-5, to view the attributes of each displayed mode.
The following table lists the matching AS/400 and Controller attributes.
AS/400 Attributes
1. Local network ID
2. Default Local location
3. Remote control point
4. Remote location name
5. One of the mode names defined
in the AS/400
AS/400 parameters required for the 3494 Controller configuration comprise of the
following three types:
1. Communication Information.
2. Network Addresses (X.25, Ethernet and Token-Ring only)
3. APPN Information
9.1.1Mode Description
The MODE name determines:
number of NWS sessions
•
maximum frame size
•
pacing value
•
The mode name "QRMTWSC", is supplied by IBM Version 2 Release 2. It defines 28 NWS
sessions and pacing value of seven.
If you want to create a new Mode, type the command: CRTMODD
2
Controller Attributes
AS/400 network name
AS/400 LU name
3494 control point (CU) name
3494 logical unit (LU) name
Default Mode name, and AS/400 System
mode name
Advertisement
Table of Contents
