Table of Contents
Advertisement
4100000 - 411300 XID Errors
The following errors are due to mismatching in the AS/400 programming or 3494
configuration
410000
A XID exchange protocol error occurred. If it does not correct itself in 1 minute
then there may be a configuration problem.
410100
XID command length error: 29 bytes > I-field > 255 bytes.The XID-field and I-
field lengths do not match.
410200
XID command contained an unsupported I-field format.
410300
The XID command exchange state indicators are set to "not supported".
410400
SDLC link protocol was not specified.
410500
Asynchronous balanced mode support.
410600
An ALS is secondary.
410700
Maximum BTU length less than 265 bytes.
410800
An SDLC profile that is either invalid or not supported.
410900
A maximum I-frame's outstanding value that is invalid or not supported.
411200
Error received by the AS/400 System from the Controller.
411300
An XID command that did not originate from an AS/400 System is received by
the Controller.
Error Identification
A-23
Advertisement
Table of Contents
