Decision Data 3000 Series User Manual page 101

Error Identification
Invalid Host Network Address. (TO network address exceeds 15 digits)
100700
Invalid Host Address. (FROM network address exceeds 15 digits)
100800
Invalid Host Network Address
100900
Attempt to enter manual options or flow control negotiation from the keyboard with
100A00
these parameters disabled.
Facility option entered incorrectly. (Characters entered are not hexadecimal - 0
100B00
through 9 or A through F)
100C00 Invalid packet window size option. (Less than 02)
100D00 Invalid packet window size option. (Greater than 07 with Modulo 8 specified)
100E00 Invalid packet window size option. (Greater than 15 with Modulo 128 specified)
100F00 Packet size not equal to 064, 128, 256 or 512.
101000 Invalid closed user group option. (Does not contain two decimal digits)
101100 Invalid control character entered.
101200 Host network address missing a CALL command.
101300 First control character (A, O, C or D) has already been entered.
101400 Network address was entered for a permanent virtual circuit (PVC).
101500 Password option was entered for a permanent virtual circuit (PVC)
101600 Invalid password option. (All not alphanumeric characters)
101800 Invalid password option. (All not alphanumeric characters)
101900 The Q or the E option was selected with the ANSWER command.
101A00 F or R control character entered for an ANSWER command or a PVC. [F=Facility;
R=Reversed charging].
101B00 The Q or the E option was selected with the ANSWER command.
101C00 CALL entered for an answer-only SVC.
101D00 OPEN entered for an answer-only SVC
A-14