Table of Contents
Advertisement
Installation
Acquire the necessary information for your configuration from your system subscription
worksheets. The attributes listed in the previous section are defined in the controller via the
setup menu.
To access the Setup menu
1. Power-on the Controller.
2. Press the UTIL key on the front panel.
3. Wait for the controller to successfully complete the loading procedure. [*UTIL*] or
[SETUP ERR] is displayed on the front panel.
4. Enter ALT+TEST sequence, or a corresponding sequence from the keyboard (see the
page 5-4 "Keying Function -- Keying Sequence."
5. The Setup menu is displayed.
6. Select the desired option and press ENTER.
7. The controller Setup menu appears.
Setup Menu Description
The Setup menu displays all the necessary configuration options. It varies depending on
your hardware configuration.
____________________________________________________________________
Select option :
To enter a menu option, type the option number in the Select Option field and press Enter.
Each time you conclude a menu option configuration the Setup menu is automatically
reaccessed and the following option is selected.
It is recommended to read the following section on key functions as well as the detailed on-
line help available on each screen. To access the on-line help press the Help key on the
keyboard.
A brief description of each option group is given in the following page.
8
CONTROLLER
SETUP :
1. Hardware configuration
2. General information
3. Host connection
4. Controller configuration
5. Network information
6. Gateway configuration
7. Device configuration
8. SNMP configuration
FILE :
9. File description
10. Save configuration file
11. Reset controller configuration to factory defaults
RESTART :
12. Restart controller (IML)
1
F1=KeysHelp
PRINT=Hardcopy
SETUP
MENU
F3=Exit
Advertisement
Table of Contents
