Decision Data 3000 Series User Manual page 56

Up to four different languages can be defined per controller; manually mapping the
devices, allows you more flexibility in choosing their address and language. You can
define different language tables for specific workstations. If you do not define the
language for a device, it is automatically assigned the default language assigned to the
Controller.
To define the KB Country language for a device
1. Move the cursor up to the desired field and enter the desired KB Country Code.
Refer to the restrictions in the following section and the list on the following page.
2. After you have completed your entries, press ENTER to register your choices.
Restrictions in defining languages
1. Language categories.
Keyboard languages fall into two categories: Type-1 and Type-2.
Type-2 category, consists of the following languages: Greek, Cyrillic, Hebrew and
Japanese KANJI-M. Type-1 category, consists of all the other languages
If the Master keyboard language is Type-1, the maximum number of additional
keyboard languages is three Type-1 keyboard languages, or one Type-2 keyboard
language.
If the Master keyboard language is Type-2, the maximum number of additional
keyboard languages is two Type-1 keyboard languages, or one Type-2 keyboard
language.
NOTES:
a. Keyboard translation codes.
Keyboard translation codes are not used if the device is a printer.
b. Displayed language code.
Keyboard language code is not displayed on the Twinax maps if the device uses the
master keyboard language.
Device Configuration
3