Table of Contents
Advertisement
from drive X5.Codes:X6,X7,X8,X9,X10."
Parameters :
X1- Current program: "FW" or "LOADER" or "SYS".
X2- File name: One of the system files.
X3- Number of sectors which were read successfuly.
X4- Number of sectors which had to be read.
X5- Drive name of system disk: 'A' for diskette,
X6 - X10 - Codes: 5 internal disk error codes
DISKFAIL: The reason for disk end operation is not legal.
Error message:"DISKFAIL:X1 is illegal end of IO opearation"
Parameters :
X1 - Code of end of disk operation
DOS FAIL: Memory overflow accured or critical error.
Error message:"DOS FAIL:Memory overflow or Error No X1"
Parameters :
X1- Code of error
Messages Common To FIRMWARE, BOOTER, LOADER
BLD GDT : Current program failed to prepare next program for running.
Error message:"BLD GDT :X1.Unable to build GDT from X2 header."
Parameters :
X1 - Current program: "FW" or "LOADER"
X2 - Next program:4030boot.bin (LOADER) or system.bin (SYS) or util.bin (SYS)
The available parameters combinations are:
"FW" + 4030boot.bin
"LOADER" + system.bin
"LOADER" + util.bin
SLn DEAD: Slot hasn't respond to command from main card.
Error message:"SL n DEAD: X1.CMD=X2, NO REPLY"
Parameters :
SLn FAIL: Slot failed to execute the command from main card.
n - slot number (hex number)
Error message:"SL N FAIL:X1.CMD=X2, IOP MSG=X3"
Parameters :
N- Slot number (hexadecimal number).
SLn BAD : Slot has respond whith wrong reply to command from main card.
Error message:"SL N BAD :X1.CMD=X2, REPLY=X3"
n- Slot number (hexadecimal number).
X1 - Current program: "FW" or "LOADER".
X2 - The main command which hasn't get a response.
X1- Current program: "FW" or "LOADER".
X2- The main command which hasn't get a response.
X3- A message from the Slot.
'C' for harddisk.
Error Identification
A-3
Advertisement
Table of Contents
