10.1.4Trap Destination Configuration
The TRAP Community name and TRAP IP Address, define the destination for receiving
SNMP TRAP messages generated.
SNMP Manager Configuration
Community Name
Read only/
Read-Write
Limited IP Address
6
This string defined in this field, is compared to each manager's
access request.
Defines the type of access permitted; read or read-write.
1 = Access is limited to Read only requests.
2 = Access allowed to Read/Write.
Defines the IP Address for the community. Only messages
originating from those IP addresses will be accepted.
A unique Internet Address (IP). The IP Address of this TCP/IP
board, must be different from the IP address of any host that is
connected to the TCP/IP network. The address consists of a 15
numeric character string divided into four groups of up to three
characters each; the groups are separated from each other by a
dot.
The four groups represent the four octaves of binary numbers
that make up the IP address--the binary form being translated to
SNMP Management