Table of Contents
Advertisement
Remote workstation
attachment
Double-byte character set
graphic field support
SNMP (Simple Network
Management Protocol)
Flexible configuration
options
System expandability
Attachment of workstation located in remote sites to one or
more AS/400s located in a central location.
The 3494 manages information exchanges with the AS/400
system over a communication network.
The 3494 supports double-byte languages such as
Japanese, Chinese. SI/SO placed in extended character
buffer is not supported.
SNMP (Simple Network Management Protocol) agent
functionality, allows SNMP management of the Model 3494
and its devices, in Token-Ring and Ethernet attachment.
The SNMP manager can control and monitor statistics
counters, node port status, status of the devices and
communication lines. The Controller sends the manager
alerts called TRAPs, if there are any unusual events it should
be informed of such as downed or problematic lines.
Two options are available:
Configuration on NWS
The 3494 can be configured from attached NWS, by a user
friendly utility program which can be run directly from the
3494. The utility program can be accessed by pressing the
UTIL button on the front panel of the 3494 controller and then
pressing ALT-Test sequence on the keyboard. This will
display the 3494 initial configuration screen.
Configuration from a PC
The 3494 can also be configured from a PC using a user-
friendly windows based application program.
The 3494 can easily be expanded to accommodate the rapid
changes in the LAN /WAN environments. As your system
expands so can the 3494 controller saving you time and
money.
Features
5
Advertisement
Table of Contents
