Table of Contents
Advertisement
10.1.1Essential Parameters Configuration
SNMP Configuration
Allows full device control and monitoring.
Activate SNMP
Y (1) = Activate to obtain full monitoring and control of device.
Agent
N (0) = Don't activate. The device cannot be managed. The
Functionality
manager is aware of its existence but it cannot monitor or control it.
A unique Internet Address (IP). The IP Address of this UDP/IP board,
IP Address
must be different from the IP address of any host that is connected to
the TCP/IP network. The address consists of a 15 numeric character
string divided into four groups of up to three characters each; the
groups are separated from each other by a dot.
The four groups represent the four octaves of binary numbers that
make up the IP address--the binary form being translated to decimal
form. Each group consists of a decimal number valued between
[000] and [255] that complies with the Class restrictions.
Subnetting is an addressing system that further divides the hostid part
of the IP address into a physical subnet part an a host address part.
Subnet Mask
This is a hierarchical addressing method in which one network
address is used for several physical network addresses.
Wherever Subnetting is used, Subnet-masking must also be used.
Define the net and subnet IDs of the slot LAN, by setting bits in the
netid and subnet id part as '1,' and those in the host address part as
'0,' subnet masking can reveal whether two hosts actually belong to
the same physical network.
This number is usually "0" unless the manager is in another LAN and
Number of IP
must be accessed via a router.
Gateways
netid
hostid
subnet
host
netid
id
id
SNMP Management
3
Advertisement
Table of Contents
