Channel; Outputs - Bender ISOMETER iso1685DP-425 Manual

Settings
8.2

(2.5) Channel

In this menu, each channel can be configured. See also
8.2 (2.5.1) Name
Enter a name for the selected channel. This name will also be displayed on the gateways and
in the web server and can be edited via these as well.
8.2 (2.5.2) CT monitoring
See chapter 8.2 (2.4.1.2) "CT
8.2 (2.5.3) Response value
See chapter 8.2 (2.4.1.3) "Response value
8.2 (2.5.4) Response value
See chapter 8.2 (2.4.1.4) "Response value
8.2

(2.6) Outputs

In this menu, each output can be configured. See also
8.2 (2.6.1) Common relay
Select the relays to be configured.
•Select all
•No selection
•Invert selection
•Relay 1 (BS 2/1)
•Relay 2 (BS 2/2)
8.2 (2.6.1.1) TEST
See chapter 8.2 (2.4.2.1.1)
8.2 (2.6.1.2) Relay mode
See chapter 8.2 (2.4.2.1.2) "Relay
8.2 (2.6.1.3) Function 1
See chapter 8.2 (2.4.2.1.3) "Function
8.2 (2.6.1.4) Function 2
See chapter 8.2 (2.4.2.1.3) "Function
8.2 (2.6.1.5) Function 3
See chapter 8.2 (2.4.2.1.3) "Function
8.2 (2.6.2) Channel relay
Select the relay to be configured.
•Relay 1 (BS 2/1)
...
isoxx1685Dx-x25_D00272_07_M_XXEN/09.2022
monitoring".
∆L
IΔL".
∆n
IΔn".
All relays are selected.
No relay is selected.
The current selection is inverted.
A single relay is selected.
"TEST".
mode".
1".
1".
1".
chapter 8.2 (2.4.1)
chapter 8.2 (2.4.2)
"Channel".
"Outputs".
59