Display - Bender ISOMETER iso1685DP-425 Manual
Insulation monitoring device for unearthed ac, ac/dc and dc power supplies it systems
Hide thumbs
Also See for ISOMETER iso1685DP-425:
- Manual (57 pages) ,
- Quick start manual (8 pages) ,
- Manual (56 pages)
Table of Contents
Advertisement
8.2
(6.3.2) BMS
8.2
(6.3.2.1) BMS address
Address setting of the BMS bus from 1 to 90.
8.2
(6.3.3) Modbus RTU
8.2
(6.3.3.1) Modbus RTU address
Address setting in the address range from 1 to 247
8.2
(6.3.3.2) Baud rate
•9.6 kB
•19.2 kB
•37.4 kB
•57.6 kB
•115 kB
8.2
(6.3.3.3) Parity
•even
•odd
•none
8.2
(6.3.3.4) Stop bits
•1
•2
•auto
8.2
(6.4) Display
Adjust the display brightness for the ISOMETER® in the display menu.
8.2
(6.4.1) Brightness
Adjust the display brightness between 0 % and 100 % in steps of 10.
If no button is pressed on the display for 15 minutes, the brightness of the display decreases.
When a button is pressed, the selected brightness is restored.
64
isoxx1685Dx-x25_D00272_07_M_XXEN/09.2022
Settings
Advertisement
Table of Contents
Need help?
Do you have a question about the ISOMETER iso1685DP-425 and is the answer not in the manual?