Display Select - Flow vision FC100 - CA User Manual

5 .8 Display select

submenu
DISPLAY SELECT
DISPLAY SELECT
FIRST LINE
M
or
DISPLAY SELECT
SECOND LINE
M
or
DISPLAY SELECT
DISP.-LIGHTING
M
or
The FC100-CA enables the user to define both lines of the display in certain points. It is possible to
select the quantities indicated on both lines (see fig. 38). The unit of the indicated quantities may be
selected in submenu PHYSICAL UNITS (see fig. 37).
Submenu DISPLAY-LIGHTING enables the user to choose weather the display is permanently lighted
or lighting is deactivated 30 seconds after the last keystroke.
The display-lighting will also be activated if an error occures. It will be deactivated 30 seconds after
the error was rectified.
FC100-CA | Flow Meter
CONFIGURATION
M
FIRST LINE
VELOCITY+TEMP.
or
M
SECOND LINE
VELOCITY+TEMP.
or
DISP.-LIGHTING
M→ yes▲ or ▼→ no
or
M
M
FIRST LINE
VOLUMETR. CURR.
or
M
SECOND LINE
VOLUMETR. CURR.
or
or
M
back to
CONFIGURATION
menu
M
FIRST LINE
TOTALIZER
or
M
SECOND LINE
TOTALIZER
or
fig. 38
51