Flow vision FC100 - CA User Manual page 35

Menu paging
The next menu option is selected by pressing M MODE (forward paging) .
Calling a menu option
Simultaneously pressing ▲ UP and ▼ DOWN = ▲ + ▼ calls the selected menu option or causes
skipping to the selected submenu.
Entry of numerals
Some menu options require numerical values to be entered. After selecting the appropriate menu
option, the value indicated can be changed by pressing ▲ UP or ▼ DOWN.
Each time ▲ UP or ▼ DOWN are pressed, the value indicated will be increased and reduced
respectively, by one numeral skip.
The longer ▲ UP or ▼ DOWN are pressed, the faster the increase or reduction.
Transfer of entries
Pressing M MODE transfers the set value or the selected menu option to a volatile memory.
A permanent transfer of settings and values is only effected when quitting the menu, after a plausi-
bility check of all entries.
Afterwards the data are still available even after repeatedly switching the FC100-CA ON/OFF.
Deleting data
Selected data such as MIN or MAX values can be deleted or reset by simultaneously pressing
▲ UP and ▼ DOWN = ▲ + ▼ .
Keyboard lock
The keyboard can be locked by pressing ▼ DOWN for at least 10 seconds. This is possible in the entire
main menu and in all submenus. Menu items which allow to set a numerical value by pressing
▲ UP and ▼ DOWN respectively are excluded (e.g. setting of measuring time).
The keyboard can be released by pressing ▲ UP for at least 10 seconds.
The actual state of the keyboard lock is stored power fail-safe.
FC100-CA | Flow Meter
OPERATING SYSTEM
35