Flow Rate Unit (Menu Option: Flow Unit); Medium Temperature Unit (Menu Option: Temp. Unit); Display (Menu Option: Display Select) - Flow vision FC01-Ex User Handbook Manual

5 . 1 . 1 .6 Flow rate unit (menu option: FLOW UNIT)

This menu option is used to set the desired flow rate unit:
* METRE/SEC [m/s]
* PERCENT [%]
Any further entries relating to flow rate (e.g. limit value, analogue output etc.) refer to that unit.
Standard percent is displayed when BLANK (no unit) is selected.
When the flow rate unit is changed, all configuration and parameter data relating to flow rate will
automatically be converted!
5 . 1 . 1 .7 Medium temperature unit (menu option: TEMP . UNIT)
This submenu is used to select medium temperature unit.
Options are:
* GRAD CELSIUS [°C]
* GRAD FAHRENHEIT [°F]
* KELVIN [K]
All other entries relating to the medium temperature (limit value, analogue output etc.) refer to the
unit selected there. When the temperature unit is changed, all configuration and parameter data
relating to medium temperature will automatically be converted.

5 . 1 . 1 .8 Display (menu option: DISPLAY SELECT)

The FC01-Ex enables the user to define certain points of the display.
When the first line of the LC display in the main menu indicates the flow rate in the unit selected as
well as the medium temperature in °C, °F, or K, it is possible to select the 2nd line from the following
menu options (see chap. 5.1.1.16).
* BARGRAPH
* LITRE/SECOND [l/s]
* LITRE/MINUTE [l/min]
3
* METRE / HOUR [m
* GALLONS°/MINUTE
Where totalizer function has been selected, the totalizer will start at zero counting in the unit selected
3
(litre, m or gallons).
FC01- Ex | Flow Meter
OPERATION
* FEET/SEC. [FPS]
* BLANK [no unit]
Totalizer:
* LITRE [l]
* METRE
3 3
/h] * FEET
* GALLONS° [° = US-GALLONS]
3 3
[m ]
3
[F ]
45