Table of Contents
Advertisement
Software Configuration
7.
Enter the computer name and click Next.
Note:
The preceding name entry opportunity does not appear for a Workgroup Server.
011
page 228.
, on
8.
Enter the current Date and Time information and click Next.
The system proceeds with installation and then automatically reboots.
9.
When the automatic reboot is complete, log in as administrator. The initial password for
administrator is CANal1.
10.
When the TCP/IP Configuration window pops up, choose
a.
whether you want a specific or automatically supplied IP address: select the appropriate
radio button. If specific, enter the IP address, Subnet Mask, and Default Gateway addresses
in the fields provided
b.
whether you want a specific or automatically supplied DNS server: select the appropriate
radio button. If specific, enter the address of the server and an alternate, if desired.
c.
If the compluter is to be a member of a domain or workgroup, select the appropriate radio
button and enter the domain/workgroup server name. For domain members a password must
be entered.
11.
Click OK.
12.
Only for A, A+, B and B+ monitor configurations, perform the following steps (for other
configurations, skip to step 13):
a.
Right click on the desktop and select Properties.
b.
In the Display Properties window, select the Settings tab
c.
Right click on the monitor 2 rectangle and select Primary.
CNF 001 Initial Power Up and Software Configuration
Page 98
SW
Refer to
Advertisement
Table of Contents
Troubleshooting
