GE Centricity RA600 Service Manual page 277

Suggested Maintenance
5. Carefully vacuum out the system, attending to heavy accumulation spots such as the
processor area.
6. Before replacing the computer cover visually verify that the cooling fans are working properly.
Note:
The use of compressed air is not recommended. Blowing dust out with a stream of air is not
recommended because of the ESD (Electro-Static Discharge) hazards to components, and the
dust hazard to the personnel in the area near the cleaning activity.
7. Proceed to the floppy disk drive head cleaning by means of a 3.5" cleaning diskette. (Local
purchase, at computer supply store.) Can be done more often if the floppy disk drive is used
regularly by customer.
8. Save the site parameters on a new configuration diskette. On a 6-month scheduled
maintenance, this allows you to have your back-up configuration floppy diskette renewed twice
a year. The floppy is automatically formatted before saving the configuration data.
Page 277
MNT 001 Scheduled Maintenance