Cnf 007 Configuring Barco 3Mp2Fh Video Driver - GE Centricity RA600 Service Manual

Software Configuration
n

CNF 007 Configuring Barco 3MP2FH Video Driver

Section 1: Introduction
This job card describes how to install and configure the Barco 3MP2FH video controller board driver
for the Barco 3M pixel flat panel monitor.
Section 2: Material Required
u
Dell 1400 computer with 3MP2FH video board installed.
u
Barco Coronis 3 Mpixel flat panel display(s).
u
Power and video connector cables for the flat panel displays
u
CD containing video driver for the 3MP2FH video board
Section 3: Prerequisites
u
3MP2FH video board must be installed in the Dell 1400 computer per IST 0012.
u
Power cable(s) connected to standard 110 Vac outlet(s)
u
Video cable(s) connected between the 3 Mpixel flat panel and the video driver board.
Section 4: Procedure
CNF 007 Configuring Barco 3MP2FH Video Driver
Page 135