GE Centricity RA600 Service Manual page 70

Hardware Installation
4-3 Workaround for Extending a Volume Created on a Basic (non-dynamic) Disk.
Windows 2000 does not allow extending a volume that was created on a Basic disk. The workaround
is to create a standalone new dynamic disk, transfer all existing data from the old to the new disk,
delete the old disk, and then extend the new disk onto the old disk space.
Note:
Perform steps 1 thru 5 of section 4-2, then continue with this procedure.
1. Right-click on the unallocated Disk 1 area and select Create Volume... from the popup menu.
Click Next on the Welcome window of the Create Volume Wizard.
Illustration 3-23:Create Volume Wizard
2. In the Select Volume Type window, click Next to accept the default.
IST 009 Optional Internal Hard Drive Connect & Configure
Page 70