GE Centricity RA600 Service Manual page 212

Software Procedures
Note:
Hard blocked refers to a system which is totally locked up. The only recourse is a reset.
1. Press the reset button located on the front of the CPU.
4-2 Shut Down System — from Command Prompt
1. Select Start > Programs > Accessories > Command Prompt, type shutdown /L hostname.
(ex. shutdown /L SCD132)
2. Confirm the shutdown.
4-3 Reboot System — from Command Prompt
1. Select Start > Programs > Accessories > Command Prompt, type
shutdown /L hostname /R (ex. shutdown /L SCD132 /R).
2. Confirm the reboot.
Section 5: OS - Config
5-1 Changing Date / Time
Note:
This procedure only covers changing the date and time, not their format(s). This procedure
cannot be performed as User IIS.
1. Right click the Task Bar (grey area next to the Start button)
2. Select Adjust Date/Time.
3. Check the Show Clock check box (if not done so already), and click OK.
Page 212
SW 008 Common Windows 2000 Procedures