GE Centricity RA600 Service Manual page 227

Software Procedures
14. Start the RA600 (RadWorks 6.0) application and click Acquire > Device on the menu bar to
open the Device Management dialog box
15. Select the digitizer device and click Load to load the device.
16. If you want to make this device a default device, select the device and click Activate.
17. Click OK to close the Device Management window.
The configuration of the RadWorks Acquisition Module for the digitizer is now complete. Test
the configuration by using RA600 (RadWorks) to scan films.
SW 010 Installing Film Digitizer SCSI Software
Page 227