Software Configuration
CNF 007 Configuring Barco 3MP2FH Video Driver
The system shown in the following screen capture has one BarcoMed 3MP2FH Imaging Boards
installed and no 3 rd party VGA card. Your configuration may look different. This example shows
Windows 2000 Display Properties Control Panel after the drivers have been installed and the
resolution set.
4-3 Installing DualView under Windows 2000
DualView allows a dual head graphics board to display two separate desktops, one for each monitor
instead of a single virtual desktop that spans across both monitors. Figure 6 below illustrates the
difference between running without and with DualView enabled under Windows 2000. DualView is a
feature that is supported by Windows XP. However, BARCO has provided a means for the user to
enable this functionality while running Windows 2000.
Page 138