Tsg 014 Workstation Application Problem Solving - GE Centricity RA600 Service Manual

Troubleshooting
n

TSG 014 Workstation Application Problem Solving

Section 1: Introduction
This job card presents possible solutions to problems that may be encountered in the use of the
Centricity RA600 application software.
Section 2: Problem Resolution
Problem
1. Can't send images
2. Don't see all images listed
3. Can't key images in cine mode
Make sure you have added a destination.
Select Connection>Destinations
Make sure that you have not selected a filtered worklist.
Worklist View = Local Patients or Local Studies
Key images can only be identified in manual cine, not auto
Page 252
TSG 014 Workstation Application Problem Solving
Possible Solution