GE Centricity RA600 Service Manual page 118

Software Configuration
4-2 Just do a Visual Check
1. If you want to execute a visual check (ignoring if it is due or not), go to Start > Programs >
MediCal Pro > MediCal Q/A Visual Check.
2. Follow each step on the screen until the application closes.
4-3 Run an individual task
1. To run an individual task, start the MediCal Pro application by selecting Start > Programs >
MediCal Pro > MediCal Pro. 2.01.
2. Select "Q/A Setup" to have an overview of the available Q/A Tasks. Select the task you would
like to run by clicking on it. Right-click on the task and select "Run Now" in the popup menu to
execute that particular task. Follow further instructions until the execution of the task ends.
3. The result of the execution is displayed in the "Last Result" column of the
Q/A setup view.
4-4 Look up histories of executed tasks
1. If you want to view the history of a task, select Start > Programs > MediCal Pro > MediCal
Pro. 2.01).
2. Select "Q/A Setup". You now see the available tasks. Select the task for which you would like
to see the history. Right-click on it; a popup menu appears. Select "History..." to bring up the
history of results for that task.
CNF 006 Monitor Calibration with Barco Tool (MediCal Pro)
Page 118