Table of Contents
Advertisement
Software Configuration
9.
If the number found does not match your configuration, click No and follow the troubleshooting
directions of the wizard (check cable connections, etc.) until all the Barco displays are found.
10.
If the display is not Barco, the wizard reports 0 found and asks if this is correct. Click Yes twice
to start the wizard searching for non-Barco display(s). The wizard again reports findings and
asks if this is correct. If not, click No & troubleshoot per the wizard screen instructions.
CNF 006 Monitor Calibration with Barco Tool (MediCal Pro)
Page 112
Advertisement
Table of Contents
Troubleshooting
