Cnf 005 Vnc Server Installation And Configuration - GE Centricity RA600 Service Manual

Software Configuration
n

CNF 005 VNC Server Installation and Configuration

Section 1: Introduction
This job card Describes how to install and configure the VNC software to receive incoming support
calls from the GEMS Remote Online Center.
Section 2: Prerequisites
u
VNC is installed on the workstation or available on Centricity RA600/RadWorks 6.0 Utility/Driver
CD-ROM.
u
Workstation user login name and password.
Section 3: Procedure
3-1 VNC Server Installation and Configuration
1. Power up the CPU and log into the work station as administrator.
2. Place the Utility/Driver CD-ROM in the CD-ROM drive and access VNC>VNCForWindows.
3. Run setup.exe.
4. Click O.K. at the Install window.
5. Click Next at the Welcome window.
6. Click Yes at the Software License Agreement window.
CNF 005 VNC Server Installation and Configuration
Page 107