Table of Contents
Advertisement
Hardware Installation
9.
Fit the new drive into a vacant area of the hard drive cage, oriented the same as the existing
drive, with the connectors facing inward toward the center of the case.
Illustration 3-17:New Drive Installed In Cage
10.
Mount the new drive to the drive cage with the four screws provided.
11.
Slide the drive cage back into CPU chassis.
12.
Pull up the drive bay door up and in to its locked position.
13.
Connect the data ribbon cable to old and new drives.
14.
Connect a power connector from the CPU power supply to each of the hard drive's power
connectors.
IST 009 Optional Internal Hard Drive Connect & Configure
Page 64
Advertisement
Table of Contents
Troubleshooting
