6. Workflow > 6.2. Preparing the equipment
Fig. 55: Connect the two connectors in DISC hoses to the connectors in the
Sonalleve Table Top.
12.
Connect the HIFU Coil cable to the Table Top coil connector.
6.2.2. Preparing the Table Top for the patient
NOTICE
Before preparing the Table Top for the patient, check that the Quality Assurance (QA) procedure
has been carried out. For more information on QA, see 7.2. Sonalleve MR-HIFU Quality Assurance
(QA) procedure.
Preparing the Table Top for use with a gel pad
To prepare the Sonalleve Table Top for the treatment session, when using a gel pad:
1.
Open a gel pad package and visually check that the gel pad is not damaged.
Instructions for Use
109745C2 / 02-2022
Fig. 56: Gel pad.
90 (192)