Table of Contents
Advertisement
2. Safety > 2.18. Symbols and labels on the equipment
2.18. Symbols and labels on the equipment
Symbols that appear on Sonalleve MR-HIFU equipment are listed in the following table. Refer to
the MR scanner's Instructions for Use for a complete list of symbols on the MR system.
The system label of the Sonalleve MR-HIFU system is located on the side of the Sonalleve Table
Top.
Tab. 3: Symbols on the equipment.
Symbol
Instructions for Use
109745C2 / 02-2022
Location
Meaning
The front end of
Warning: crushing hazard: hands
the trolley of the
Your fingers may get crushed if caught between the Table
Sonalleve Table
Top and the spacer when pulling the Table Top back from
Top
the imaging position.
Follow instructions for use
Next to the
System label
You must read the Instructions for Use before using the
Sonalleve MR-HIFU system.
The
Sonalleve QA
You must read the Instructions for Use and/or a
phantom
separately supplied Instructions for Use of the QA
phantom before using the QA phantom.
DISCfill tool
OFF
Sonalleve
Generator
Indicates the OFF state of a switch.
Cabinet, DC
voltage
On the Safety Device, indicates that the button is used
supply switch
to stop sonication.
Safety Device
Stop button
ON
Sonalleve
Generator
Indicates the ON state of a switch.
Cabinet, DC
voltage supply
switch
Safety Device
ON/Enable
Enable button
Indicates that the button is used to toggle between the
enabled and standby states of the ultrasound generators.
26 (192)
Advertisement
Table of Contents
