Table of Contents
Advertisement
5. User interface > 5.1. Overview
5.1. Overview
The Sonalleve MR-HIFU user interface is used for planning, performing and monitoring the
treatment using images obtained from the MR scanner.
The user interface provides versatile tools for viewing the images in all imaging planes. The way in
which the images are viewed can be optimized for each treatment stage.
The target to be treated and other areas of interest can be defined and visualized as overlays on
top of the images.
The user interface also enables constant monitoring of the treatment for patient safety throughout
the treatment.
5.2. Starting the Sonalleve MR-HIFU application
5.2.1. Selecting the configuration
The Sonalleve MR-HIFU application can be started in two different modes regarding which
configuration the application uses.
Therapy is for clinical use. The application starts with the Site Default Configuration (see
5.2.1.1. Site Default Configuration). For normal users, the Sonalleve console is set to start the
application in Therapy mode when the user logs in.
Research is for experimental use by researchers and other qualified advanced users. The
application starts with the current configuration, without first loading the Site Default
Configuration. Research mode is only available to HIFU Power Users (see 10.7. Hospital
administrator and user accounts).
On the Windows desktop of HIFU Power Users, there is a shortcut to start the application in
Therapy mode. Shortcuts for both starting modes appear in the Windows Start menu.
Instructions for Use
109745C2 / 02-2022
5. User interface
56 (192)
Advertisement
Table of Contents
